1060 aluminum sheet description

Alloy : 1060

Temper:H12,H14,H16,H18,H22,H24,H26,H28,O

Mother coil: direct chill cast (DC) or Continuous cast(CC)

Thickness: 0.2mm-6.0mm

Width:600mm-2600mm

Length:300mm-11000mm

1060 aluminium sheet chemical composition:aluminum: 99.6% min ,copper:0.05% max,Iron: 0.35% max,Magnesium:0.03%max,Manganess:0.03% max,Silicon:0.25% max，Titanium:0.03%max,Vanadium:0.05% max,Zinc: 0.05%max

Packaging detail: the package of 1060 aluminum sheet meet the export standard,plastic film and brown paper can be covered at customers' need,wooden case or wooden pallet is adopted to protect products fom damage during the delivery.

1060 aluminum sheet application

1060 aluminum sheet products are often used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
1060 aluminum sheet usage is roofing&cladding system,aluminum shutter,aluminum gutter,aluminum ceiling
,aluminum curtain wall,decration for household appliances,composited panel,decoration for container vehicle,electrical transformer,aluminum can & tin,decortion for machines,signs& advertisement.
Changyuan aluminum is one manufacterer of 1060 aluminum sheet,the surface is including the mill finish,brushed,mirror,color coated,anodized and tread plate ,embossed so on.Other 1000 series aluminum products is including the 1050,1070,1100,1050A,1085,1090 ,1350,1145 aluminum coils.

Introduction of 1060 Aluminium sheet

1060-H24 aluminum sheet  is a type of 1060 aluminum. It is furnished in the H24 temper. To achieve this temper, the metal is strain hardened, and then partially annealed, to a strength that is roughly halfway between annealed (O) and full-hard (H28).
1060-H14 aluminum sheet is a type of 1060 aluminum. It is furnished in the H14 temper. To achieve this temper, the metal is strain hardened to a strength that is roughly halfway between annealed (O) and full-hard (H18).
1060-H12 aluminum sheet is a type of 1060 aluminum. It is furnished in the H12 temper. To achieve this temper, the metal is strain hardened to a strength that is roughly a quarter of the way between annealed (O) and full-hard (H18).
1060-H16 aluminum sheet is a type of 1060 aluminum. It is furnished in the H16 temper. To achieve this temper, the metal is strain hardened to a strength that is roughly 3/4 of the way between annealed (O) and full-hard (H18).
1060-H18 aluminum sheet is a type of 1060 aluminum. It is furnished in the H18 temper. This is the strongest temper normally produced through the action of only strain hardening.
1060-H22 aluminum sheet is a type of 1060 aluminum. It is furnished in the H22 temper. To achieve this temper, the metal is strain hardened, and then partially annealed, to a strength that is roughly a quarter of the way between annealed (O) and full-hard (H28).
1060-H26 aluminum sheet is a type of 1060 aluminum. It is furnished in the H26 temper. To achieve this temper, the metal is strain hardened, and then partially annealed, to a strength that is roughly 3/4 of the way between annealed (O) and full-hard (H28).
1060-H28 aluminum sheet is a type of 1060 aluminum. It is furnished in the H28 temper. This is the strongest temper normally produced through the action of strain hardening followed by partial annealing. It is closely related to H18.
1060-O aluminum sheet is a type of 1060 aluminum. It is furnished in the annealed (O) condition. It has the highest ductility compared to the other variants of 1060 aluminum.